You are Safe with Bodygard!

Price Offer / Sample Request   

Technology

Coverall Standards

Category I : Simple products. Products which are not suitable to protect against any form of hazard.
Category II : Intermediate products. Products which fall neither into categories I nor III.
Category III : Complex products. Products which are worn or held in order to protect against any hazard which may be life threatening.

TYPE 1 EN 943-1

TYPE 1 EN 943-1

Gas tight suits. Suits which are intrinsically sealed against the environment.

TYPE 2 EN 943-1

TYPE 2 EN 943-1

Non-gas tight suits. Suits which retain a positive internal pressure to prevent ingress of dusts, liquids or vapours.

TYPE 3 EN 14605

TYPE 3 EN 14605

Liquid tight suits. Suits which can protect against strong and directional jets of a liquid chemical such as spray from a burst pipe under pressure. Requires a barrier fabric and sealed seams.

TYPE 4 EN 14605

TYPE 4 EN 14605

pray tight suits. Suits which can protect against saturation of liquid chemical, where volume of the liquid builds up on the suit forming pools, resulting in rivulets. Requires a barrier fabric and sealed seams..

TYPE 5 EN ISO 13982-1

TYPE 5 EN ISO 13982-1

Dry particle suits. Suits for protection against hazardous dusts and any dry particles.

TYPE 6 EN 13034

TYPE 6 EN 13034

Reduced spray suits. Suits for protection against light spray and splashes of liquid chemicals where there is no directional spray or build up of liquid on the suit, but there may be a fine mist of droplets in the atmosphere.

EN 1149-5

EN 1149-5

Electrostatic dissipative protective clothing with a surface resistance of maximum 2.5x 10 exp 9 ohm.

EN 1073-2

EN 1073-2

Protective clothing against particulate radioactive contamination.

EN ISO 14116

EN ISO 14116

Limited flame spread materials, material assemblies and clothing.

EN14126

EN14126

Protection against biological hazards and infective agents.

Be Informed

You can sign up for our newsletter to be informed
about innovations about Bodygard.